| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Delta Rockwell 28-200 riser block http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=44423 |
Page 1 of 1 |
| Author: | CraigG [ Sun Oct 26, 2014 2:18 pm ] |
| Post subject: | Delta Rockwell 28-200 riser block |
I just picked up a nice Delta 28-200 with a 1 1/2 hp motor that I would like to set up for resawing. Delta no longer sells the riser block kit for this saw and those available from other parties are ridiculously expensive. Does anyone know of another manufacturer's riser kit that fits without modification? Grizzly? Jet? Any others? Thanks, Craig |
|
| Author: | Clay S. [ Sun Oct 26, 2014 3:21 pm ] |
| Post subject: | Re: Delta Rockwell 28-200 riser block |
You can make one from a block of hardwood, a long bolt and an inexpensive steel rod. I used a bandsaw with a wooden riser block and it worked perfectly fine. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|